European Oil, Gas, and Renewable Energy Solutions >  News  

 Press Releases/Archive   |  Events Calendar 

..
> Homepage (News on Homepage)
> Upstream News
> Midstream News
> Downstream News
> Renewable Energy / Offshore Wind
> General Interest News 


 
. Photos Pipe Production & Offshore Pipe ©  Interpipe

 


Interpipe develops big diameter seamless pipes


Jan 24, 2014 + + + Interpipe has begun producing a new product – big diameter seamless pipes according to GOST and EN standards. The big diameter pipes are developed at Interpipe NTRP, where the previous maximum mill range was limited to 377 mm. In October 2012 the experimental pipes of 426 mm in diameter with 10 mm wall thickness were produced for Belorussian consumers. In January 2013 there has been one more break-through, a new dimension size of 406.4 mm in diameter with wall thickness of 50 and 68 mm made according to GOST standard for the 32XA steel grade. These were developed for Polish consumers. And finally in the 3rd quarter of 2013 Inerpipe produced and delivered to German consumers pipes of 406.4 mm in diameter with 10 – 70 mm wall thickness in accordance with European standards EN 10210-1,2 and EN 10297-1 in steel grades S355J2H/E355.

Ivan Mazanka, Regional Sales Director for Europe at Interpipe, said: “The big diameter seamless pipes are currently in high demand globally; however, the number of suppliers for these products is limited. For this reason manufacturing of pipes 406.4 mm and 426 mm in diameter according to euro-standards is a very good opportunity for us to meet these needs by delivering high quality products in accordance with our European customers’ requirements.

+ + +

Interpipe is a vertically integrated steel pipe and railway wheel company. It is among the ten largest producers of pipe products and the third largest producer of railway wheels in the world. The company’s products are supplied to more than 80 countries all over the world through a chain of commercial offices located in Ukraine, Russia, Kazakhstan, Europe, the USA and the Middle East.

In 2012 the company’s mills produced about 1.26 mln tons of pipe and wheel products. Annual revenue from sales in 2012 amounted to $USD2 billion.

Interpipe Steel is a key investment project for Interpipe that will provide the company’s steel and pipe production units with their own billets. The new plant’s capacity will be 1,320,000 tons a year, which will make it the largest mill in Eastern Europe. Total investment in the project amounts to $USD 700 million.

Source: Ekaterina Bazhan
www,interpipe.biz

 






 




 

 





Worldwide more than
100,000 paid subscriptions

Worldwide more than 48,000 subscriptions -
100% one-year direct request qualification

PennWell
Petroleum Group:

Oil & Gas Journal
Oil & Gas Journal Russia
OGJ LatinoAmericana
OGJ_eNewsletter
 
OGJ-Website-Statistics

Oil, Gas & Petrochem Equipment

Offshore Magazine
Offshore Russia
Offshore eNewsletter 
Offshore Website Statistics

Oil & Gas Financial Journal


 

.

 .

+ + + 

 For more information, media kits or sample copies please contact
Andreas Sicking
+49 (0)2903-338570

wilhelms@pennwell.com www.sicking.de
 


Please send news releases to Wilhelm Sicking - sicking-media@email.de