Siemens presents specific drive for the
chemical, oil, gas and process industry:
Sinamics G180
Further development of the Loher Dynavert T converter with optimized userfriendliness
Particularly suitable for operation with explosion-proof motors
With the new Sinamics G180 converter the Siemens Drive Technologies Division
now offers a specific drive solution for the chemical, oil, gas and process industry.
This new drive solution, which is a further development of the Dynavert T frequency
drive, has now been seamlessly incorporated into the Sinamics drive family under
the product name Sinamics G180. The user-friendliness and commissioning of this
drive have been especially optimized by integrating it into the Sizer and DT Configurator engineering tools. With its industry-specific features such as dV/dT filter, line
filter and Atex-certified PTC monitoring for ex-certified motors, this efficient drive is
ideally suited for operating pumps, fans and compressors also in combination with
explosion-proof motors.
In the chemical and petrochemical industry with its explosion hazard, aggressive
atmosphere and high temperatures, high demands are made on drive solutions.
Such high requirements are met by the new Sinamics G180 frequency drive which
can fulfill customer specific requirements in terms of the “No deviation philosophy”.
With its industry-specific features, the ATEX-certified PTC monitoring device has
been specially designed for operation with explosion-proof motors. This furtherdeveloped version of the Dynavert T converter is characterized by an optimized degree of usability. Thanks to the integrated dV/dT filter, long motor cable runs up to
350 meters are also no problem. This frequency converter, which is designed according to recommendation NE 37 of the Namur standard, has in its standard version a terminal strip for variable-speed drives. By means of the ATEX-certified
temperature monitoring facility in combination with the “STO” function, it is possible to
operate the explosion-proof motor without the need for the normally required line
contactor. Evaluation takes place directly via the PTC Thermistor installed in the
motor winding as sole protection. Optimized pulse patterns further enable high utilization of the motor voltage with low additional motor noise.
Dimensioning the converter is now also much easier, as it has been integrated in the
Sizer for Siemens Drives engineering tool and in the DT Configurator. The Sinamics
G180 can therefore be configured quickly and easily, enabling it to be seamlessly
incorporated into the Sinamics system design tools. The variable drive in industryspecific version covers an output range from 2.2 kW to 6,600 kW at the voltage levels 400/500/690 V (Voltage Range 230V – 690V). It is suitable not just for use in
pumps, fans and compressors, but also for conveyor applications, and for mixers
and extruders in the chemical, oil, gas and process industry.
Source: Franz-Ferdinand Friese, Siemens AG
April 2, 2013
|
PennEnergy
Weekly Video News
. Oil
& Gas Journal: Worldwide more than 100,000 paid subscriptions
Learn
more .
OGJ
Executive Briefs
.PennWell Petroleum Group:
OGJ - Oil & Gas Journal
OGJ_eNewsletter
Offshore Magazine
Offshore eNewsletter
Oil & Gas Financial Journal
Oil, Gas & Petrochem
OGJ Russia
OGJ LatinoAmericana
PennEnergy PennEnergy-eNewsletter
+ + +
For more information, media
kits or
sample copies please contact
wilhelms@pennwell.com
www.sicking.de
|